Study on Mineralogical Characteristics of Peru Copper-Sulphur Ore Dressing Process by X-ray Diffraction and Scanning Electron Microscope
-
摘要: 秘鲁铜硫矿石的主要回收对象是铜和硫矿物，由于铜矿物嵌布复杂、粒度过细以及与各种脉石矿物或金属矿物交生关系紧密，利用传统工艺矿物学研究方法如化学分析、光学显微镜检测等较难准确定量其工艺矿物学参数。本文采用化学分析、X射线衍射、扫描电镜、偏光显微镜及矿物参数自动分析系统（MLA）等技术手段，研究秘鲁铜硫矿石的化学成分、矿物组成和主要矿物的嵌布特征、粒度分布及单体解离特性等，并对影响选矿指标的主要矿物学因素进行分析。结果表明：矿石中主要元素为Cu（0.65%）和S（9.53%）。矿石中黄铁矿（16.57%）含量较高，形态较为规则，与其他矿物之间的交生关系相对简单，粒度普遍偏粗，其中粒径大于0.30mm的黄铁矿占95.06%。铜矿物主要以不规则粒状、皮壳状、网脉状、纤维状、尘粒状、斑点状分布于脉石中或与黄铁矿、闪锌矿、磁铁矿等金属矿物交生紧密，粒度极不均匀，使得铜矿物解离难度加大，且矿石中云母（12.51%）、绿泥石（3.74%）、滑石（3.34%）、高岭石、蒙脱石（3.59%）等黏土质矿物含量较高，在磨矿过程中易发生泥化从而恶化分选环境。根据该类型矿石的工艺矿物学特性，本文建议采用"粗磨-部分优先浮铜-铜硫混浮-混合精矿再磨再选分离"的工艺流程，可得到质量高的铜、硫精矿。
-
关键词:
- 矿物参数自动分析系统 /
- 铜硫矿石 /
- 工艺矿物学 /
- 黏土矿物 /
- 扫描电镜
Abstract:BACKGROUNDThe main recovered minerals of copper sulfur ores in Peru were copper minerals and sulfur minerals. Due to the complexity of the embedded copper minerals, the superfine granularity of copper minerals and their close relationship with various gangue or metal minerals, the traditional process mineralogy research methods, such as chemical analysis and optical microscope detection, were difficult to quantify their process mineralogical parameters accurately. OBJECTIVESTo systematically investigate the process mineralogy of copper-sulfur ore in Peru. METHODSBy means of chemical analysis, X-ray Diffraction, Scanning Electron Microscope, Polarizing Microscope and Mineral Liberation Analysis, the systematic process mineralogy of copper-sulfur ores including chemical composition, mineral composition, occurrences of main minerals, particle size distribution and monomer dissociation characteristics were investigated, and the main mineralogical factors affecting the mineral dressing index were analyzed. RESULTSThe main elements in the ore were Cu (0.65%) and S (9.53%). The content of pyrite (16.57%) in the ore was relatively high, and its morphology was regular. The relationship between pyrite and other minerals was relatively simple, and the particle size was generally coarse. Pyrite particle size larger than 0.30mm accounted for 95.06%. However, the copper minerals were mainly irregular granular, shell shaped, reticulated, fibrous, dust-like, and speckled in gangue minerals or intersected with pyrite, sphalerite, magnetite and other metal minerals. The uneven particle size of copper minerals makes the dissociation of copper minerals more difficult. Moreover, the contents of clay minerals such as mica (12.51%), chlorite (3.74%), talc (3.34%), kaolinite and montmorillonite (3.59%) were abundant in the ore. During grinding, mudding occurred easily, which worsened the separation environment. CONCLUSIONSThe mineral processing flowsheet of coarse grinding-partially preferred floating copper-copper sulfur mixed flotation-mixed concentrate regrinding and separation can be used in copper-sulfur ore of Peru. -
-
表 1 主要矿物的解离度
Table 1. Dissociation degree of main minerals
矿物 磨矿细度 单体 连生体(%) >3/4 3/4~1/2 1/2~1/4 < 1/4 铜矿物 -0.074μm 50% 55.38 13.84 9.05 7.06 14.67 -0.074μm 65% 70.69 7.55 5.74 5.01 11.01 黄铁矿 -0.074μm 50% 87.45 10.38 1.01 0.69 0.47 -0.074μm 65% 93.51 5.94 0.34 0.16 0.05 
下载: 导出CSV
表 2 铜矿物和黄铁矿连生体与不同矿物嵌连的比例
Table 2. Ratio of copper minerals and pyrite associated minerals to different minerals
连生矿物 占铜矿物连生体的比例
(%)占黄铁矿连生体的比例
(%)-0.074μm
50%-0.074μm
65%-0.074μm
50%-0.074μm
65%辉钼矿 微量 微量 0.40 0.00 铜矿物 - - 30.92 33.44 黄铁矿 36.91 44.12 - - 石英 15.71 5.15 10.68 8.63 长石 6.12 8.39 7.41 7.70 闪石/石榴石 10.28 7.10 9.09 8.93 云母/绿泥石 11.16 15.35 14.82 17.57 滑石 3.81 5.08 4.22 7.55 高岭石/蒙脱石 6.19 6.31 3.74 3.39 磁铁矿 0.83 0.48 0.40 1.08 菱铁矿 6.52 4.85 14.66 6.63 其他 2.47 3.17 3.66 5.08 合计 100.00 100.00 100.00 100.00
下载: 导出CSV
-
[1] 贾木欣.国外工艺矿物学进展及发展趋势[J].矿冶, 2007, 16(2):95-99. doi: 10.3969/j.issn.1005-7854.2007.02.025
Jia M X.Process mineralogy progress and its trend abroad[J].Mining & Metallurgy, 2007, 16(2):95-99. doi: 10.3969/j.issn.1005-7854.2007.02.025
[2] 肖仪武, 方明山, 付强, 等.工艺矿物学研究的新技术与新理念[J].矿产保护与利用, 2018(3):49-54. http://d.old.wanfangdata.com.cn/Periodical/kcbhyly201803009
Xiao Y W, Fang M S, Fu Q, et al.New techniques and concepts in process mineralogy[J].Conservation and Utilization of Mineral Resources, 2018(3):49-54. http://d.old.wanfangdata.com.cn/Periodical/kcbhyly201803009
[3] Lotter N O, Baum W, Reeves S, et al.The business value of best practice process mineralogy[J].Minerals Engineering, 2018, 116:226-238. doi: 10.1016/j.mineng.2017.05.008
[4] 王蓓, 单勇, 赵培樑, 等.工艺矿物学对难选矿石评价的意义[J].矿产综合利用, 2015(1):58-60. doi: 10.3969/j.issn.1000-6532.2015.01.013
Wang B, Shan Y, Zhao P L, et al.The meaning of process mineralogy on appraising refractory minerals[J].Multipurpose Utilization of Mineral Resources, 2015(1):58-60. doi: 10.3969/j.issn.1000-6532.2015.01.013
[5] 刘榕鑫, 朱坤, 谢海云, 等.云南斑岩型多金属金矿的嵌布特征及赋存状态研究[J].岩矿测试, 2018, 37(4):404-410. http://www.ykcs.ac.cn/article/doi/10.15898/j.cnki.11-2131/td.201710200169
Liu R X, Zhu K, Xie H Y, et al.Study on the inlay characteristics and occurrences of Yunnan porphyry polymetallic gold deposits[J].Rock and Mineral Analysis, 2018, 37(4):404-410. http://www.ykcs.ac.cn/article/doi/10.15898/j.cnki.11-2131/td.201710200169
[6] Lotter N O.Modern process mineralogy:An integrated multi-disciplined approach to flowsheeting[J].Minerals Engineering, 2011, 24(12):1229-1237. doi: 10.1016/j.mineng.2011.03.004
[7] Lotter N O, Kormos L J, Oliveira J, et al.Modern process mineralogy:Two case studies[J]. Minerals Engineering, 2011, 24(7):638-650. doi: 10.1016/j.mineng.2011.02.017
[8] 罗立群, 李金良, 曹佳宏.哈密铜镍矿工艺矿物学特性与影响选矿的因素[J].中国有色金属学报, 2014, 24(7):1846-1855. http://d.old.wanfangdata.com.cn/Periodical/zgysjsxb201407023
Luo L Q, Li J L, Cao J H.Process mineralogy and factors affecting mineral processing for copper-nickel ore in Hami[J].The Chinese Journal of Nonferrous Metals, 2014, 24(7):1846-1855. http://d.old.wanfangdata.com.cn/Periodical/zgysjsxb201407023
[9] 陈秋虎, 解志锋.安徽铜陵某铜矿工艺矿物学研究[J].矿冶, 2017, 26(1):83-86. doi: 10.3969/j.issn.1005-7854.2017.01.020
Chen Q H, Xie Z F.Study on process mineralogy of a copper ore from Tongling, Anhui[J].Mining & Metallurgy, 2017, 26(1):83-86. doi: 10.3969/j.issn.1005-7854.2017.01.020
[10] 谢海云, 叶群杰, 周平, 等.云南思茅地区铜锌硫化矿工艺矿物学分析[J].岩矿测试, 2014, 33(3):345-352. doi: 10.3969/j.issn.0254-5357.2014.03.011 http://www.ykcs.ac.cn/article/id/3de19768-8650-4b93-8e60-2bf31f3a54d1
Xie H Y, Ye Q J, Zhou P, et al.Process mineralogy analysis of copper-zinc sulfide ore from the Simao region, Yunnan Province[J].Rock and Mineral Analysis, 2014, 33(3):345-352. doi: 10.3969/j.issn.0254-5357.2014.03.011 http://www.ykcs.ac.cn/article/id/3de19768-8650-4b93-8e60-2bf31f3a54d1
[11] 高歌, 王艳.MLA自动检测技术在工艺矿物学研究中的应用[J].黄金, 2015(10):66-69. doi: 10.11792/hj201510015
Gao G, Wang Y.Application of MLA automatic technology in process mineralogy research[J].Gold, 2015(10):66-69. doi: 10.11792/hj201510015
[12] 高倩倩, 刘杨, 杨艳芳, 等.MLA与偏光显微镜在工艺矿物学研究中的应用对比[J].矿业工程, 2018, 16(4):39-40. http://d.old.wanfangdata.com.cn/Periodical/gwjsks201804013
Gao Q Q, Liu Y, Yang Y F, et al.The application comparison between MLA and polarizing microscope in process mineralogy study[J].Mining Engineering, 2018, 16(4):39-40. http://d.old.wanfangdata.com.cn/Periodical/gwjsks201804013
[13] 唐志东, 李文博, 高鹏, 等.朝阳钒钛磁铁矿工艺矿物学研究[J].东北大学学报(自然科学版), 2017, 38(12):1769-1774. doi: 10.12068/j.issn.1005-3026.2017.12.021
Tang Z D, Li W B, Gao P, et al.Mineralogical study of vanadium titanium magnetite ore in Chaoyang[J].Journal of Northeastern University(Natural Science), 2017, 38(12):1769-1774. doi: 10.12068/j.issn.1005-3026.2017.12.021
[14] 成岚, 李茂林, 黄光耀.某铅锌尾矿浓密机溢流的工艺矿物学分析[J].中国有色金属学报, 2015(7):1953-1960. http://d.old.wanfangdata.com.cn/Periodical/zgysjsxb201507027
Cheng L, Li M L, Huang G Y.Process mineralogy analysis of certain lead-zinc tailings thickener overflow[J].The Chinese Journal of Nonferrous Metals, 2015(7):1953-1960. http://d.old.wanfangdata.com.cn/Periodical/zgysjsxb201507027
[15] Gottlieb P, Wilkie G, Sutherland D, et al.Using quan-titative electron microscopy for process mineralogy applications[J].Journal of Metals, 2000, 52(4):24-25. https://www.researchgate.net/publication/226144219_Using_Quantitative_Electron_Microscopy_for_Process_Mineralogy_Applications
[16] Lewis D B.Scanning electron microscopy and X-ray microanalysis[J].Transactions of the Institute of Materials Finishing, 1997, 70(4):198-202. http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ025182578/
[17] 胡海祥, 范作鹏, 牛桂强, 等.焦家金矿选厂旋流器溢流产品工艺矿物学分析[J].岩矿测试, 2014, 33(4):535-544. doi: 10.3969/j.issn.0254-5357.2014.04.014 http://www.ykcs.ac.cn/article/id/97ae7b9d-254e-4190-92b2-245a5006efff
Hu H X, Fan Z P, Niu G Q, et al.The mineralogy characteristics of overflow product from hydrocyclone in the Jiaojia glod mine[J].Rock and Mineral Analysis, 2014, 33(4):535-544. doi: 10.3969/j.issn.0254-5357.2014.04.014 http://www.ykcs.ac.cn/article/id/97ae7b9d-254e-4190-92b2-245a5006efff
[18] 王含, 周征宇, 钟倩, 等.电子微探针-X射线衍射-扫描电镜研究老挝石岩石矿物学特征[J].岩矿测试, 2016, 35(1):56-61. http://www.ykcs.ac.cn/article/doi/10.15898/j.cnki.11-2131/td.2016.01.010
Wang H, Zhou Z Y, Zhong Q, et al.Study on petrological and mineralogical characteristics of Laos stone by EPMA-XRD-SEM[J].Rock and Mineral Analysis, 2016, 35(1):56-61. http://www.ykcs.ac.cn/article/doi/10.15898/j.cnki.11-2131/td.2016.01.010
[19] Gu Y.Automated scanning electron microscope based mineral liberation analysis an introduction to JKMRC/FEI mineral liberation analyser[J].Journal of Minerals & Materials Characterization & Engineering, 2003, 2(1):33-41. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.4236_jmmce.2003.21003
[20] Fandrich R, Gu Y, Burrows D, et al.Modern SEM-based mineral liberation analysis[J]. International Journal of Mineral Processing, 2007, 84(1):310-320. http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ026196564/
[21] Gu Y, Schouwstra R P, Rule C.The value of automated mineralogy[J].Minerals Engineering, 2014, 58(4):100-103. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=cac994c9a3d0c82fd843538c3677855c
[22] 苏秀珠, 黄志华, 衷水平, 等.卡林型金矿石中金的赋存状态分析新方法[J].岩矿测试, 2013, 32(3):474-482. doi: 10.3969/j.issn.0254-5357.2013.03.021 http://www.ykcs.ac.cn/article/id/b05b590b-585f-420f-8b4a-3a96282801ae
Su X Z, Huang Z H, Zhong S P, et al.New analysis method for glod occurrence in carlin-type glod ore[J].Rock and Mineral Analysis, 2013, 32(3):474-482. doi: 10.3969/j.issn.0254-5357.2013.03.021 http://www.ykcs.ac.cn/article/id/b05b590b-585f-420f-8b4a-3a96282801ae
[23] 谢海云, 李圆洪, 叶群杰, 等.滇西铜多金属硫化矿的工艺矿物学特性[J].矿物岩石, 2015, 35(4):17-22. http://d.old.wanfangdata.com.cn/Periodical/kwys201504003
Xie H Y, Li Y H, Ye Q J, et al.Characteristics of processing mineralogy of polymetallic sulfide in West Yunnan[J].Journal of Mineralogy and Petrology, 2015, 35(4):17-22. http://d.old.wanfangdata.com.cn/Periodical/kwys201504003
[24] 唐志东, 陈国岩, 曲孔辉, 等.鞍钢东部尾矿工艺矿物学研究[J].金属矿山, 2018(6):109-113. http://d.old.wanfangdata.com.cn/Periodical/jsks201806022
Tang Z D, Chen G Y, Qu K H, et al.Research on process mineralogy of eastern tailings in Ansteel[J].Metal Mine, 2018(6):109-113. http://d.old.wanfangdata.com.cn/Periodical/jsks201806022
[25] 周耀文, 文书明, 王伊杰, 等.云南大屯锡粗精矿工艺矿物学研究[J].岩石矿物学杂志, 2017, 36(6):779-784. doi: 10.3969/j.issn.1000-6524.2017.06.002
Zhou Y W, Wen S M, Wang Y J, et al.Process mineralogical research on the rough tin concentrate in Datun, Yunnan Province[J].Acta Petrologica et Mineralogica, 2017, 36(6):779-784. doi: 10.3969/j.issn.1000-6524.2017.06.002
[26] Nagle J F, Cognet P, Dupuy F G, et al.Structure of gel phase DPPC determined by X-ray diffraction[J].Chemistry and Physics of Lipids, 2019, 218:168-177. doi: 10.1016/j.chemphyslip.2018.12.011
[27] Fagundes A C F, Lopes L M, Antoniassi M, et al.Stru-ctural characterization of canine mammary tissue by X-ray diffraction[J].Radiation Physics and Chemistry, 2019, 155:22-25. doi: 10.1016/j.radphyschem.2018.07.018
[28] 艾光华, 周源, 魏宗武.提高某难选铜矿石回收率的选矿新工艺研究[J].金属矿山, 2008(11):46-48. doi: 10.3321/j.issn:1001-1250.2008.11.014
Ai G H, Zhou Y, Wei Z W.Study on the new beneficiation for improving the recovery of certain refractory copper ore[J].Metal Mine, 2008(11):46-48. doi: 10.3321/j.issn:1001-1250.2008.11.014
[29] 周玉才.某难选低品位铜硫矿选矿工艺研究[J].有色矿冶, 2013(2):31-34. doi: 10.3969/j.issn.1007-967X.2013.02.012
Zhou Y C.Study on the mineral processing technology of a refractory low grade copper sulfideore[J].Nonferrous Mining and Metallurgy, 2013(2):31-34. doi: 10.3969/j.issn.1007-967X.2013.02.012
[30] 卫召, 孙伟, 张庆鹏, 等.细粒硫化铜矿与易泥化钙镁矿物的浮选分离[J].有色金属工程, 2017, 7(4):64-69. doi: 10.3969/j.issn.2095-1744.2017.04.014
Wei Z, Sun W, Zhang Q P, et al.Flotation separation of fine copper sulfide and easy-sliming[J].Nonferrous Metals Engineering, 2017, 7(4):64-69. doi: 10.3969/j.issn.2095-1744.2017.04.014
-
图(4)
表(2)
计量
- 文章访问数: 2107
- PDF下载数: 76
- 施引文献: 0