Simultaneous Determination of Sn, W, Mo, Cu, Pb and Zn in Tin Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry
-
摘要: 锡矿石是难分解的矿物,共生与伴生元素多,其中的锡钨钼在单一盐酸溶液中易沉淀,准确测定锡矿石中的主次量元素一直是分析技术难点。本文以过氧化钠为熔剂,高温熔融样品,在酒石酸-盐酸-双氧水体系中进行酸化,选用该矿种中仅含有少量的钴作为内标,建立了电感耦合等离子体发射光谱同时测定锡矿石中锡钨钼铜铅锌的分析方法。方法线性范围为0.00~40.0 mg/L;方法检出限为锡10 mg/kg,钨30 mg/kg,钼3.3 mg/kg,铜12 mg/kg,铅15 mg/kg,锌40 mg/kg;方法精密度(n=9)小于5.0%,实际样品的测定值与传统化学方法及国家标准方法的测定值吻合较好。本方法采用过氧化钠碱熔锡矿石,溶样彻底,并省去了氢氟酸挥发硅的蒸酸过程,节约了样品处理时间;采用酒石酸-双氧水-盐酸体系溶解熔融物,有利于溶液中的锡钨钼形成稳定的络合物,避免了单纯盐酸体系下产生钨酸、钼酸和锡酸沉淀导致测定结果偏低的问题。
-
关键词:
- 锡矿石 /
- 主次量元素 /
- 过氧化钠碱熔 /
- 电感耦合等离子体发射光谱法
Abstract: The work involved to accurately determine the major and minor elements in tin ore, which contains large quantities of paragenetic and associated elements is extremely challenging. It is difficult to decomposed tin ore and the Sn, W and Mo are easily precipitated in HCl solution. A highly efficient analytic method which is capable of simultaneously determining Sn, W and Mo in tin ores by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) is reported in this paper. The ore samples are melted with Na2O2 and acidized by mixed tartaric acid, hydrochloric acid and hydrogen peroxide. Co is used as the internal standard element. The linear range of this present method is 0.00-40.0 mg/L, and the detection limits are 10 mg/kg for Sn, 30 mg/kg for W, 3.3 mg/kg for Mo, 12 mg/kg for Cu, 15 mg/kg for Pb and 40 mg/kg for Zn, respectively. The relative standard deviation (RSD,n=9) is less than 5.0%. All results of the National Standard Reference Materials determined by this method are consistent with the certified values. The samples can reach complete melting by using Na2O2 and the step to evaporate the HF acid to remove Si can be avoided, which results in reducing the processing time of samples. The application of mixed tartaric acid-hydrochloric acid-hydrogen peroxide system assists Sn, W and Mo to form stable complexations, which solves the problem of lower determining results due to forming precipitations of tungstenic acid, molybdic acid and stannic acid in HCl solution. -
-
表 1 碱熔与混合酸溶样测定结果的比较
Table 1. Comparison of analytical results of elements using Na2O2 fusion and mixed acid dissolution
标准物质
编号元素 w/% 标准值 碱熔测定值(本法) 酸溶测定值 GBW 07281
(锡矿石)Sn 4.47 4.46 0.047 W 0.068 0.067 0.065 Mo 0.027 0.028 0.028 Cu 0.26 0.27 0.26 Pb 2.72 2.75 2.74 Zn 0.74 0.71 0.74 GBW 07282
(锡矿石)Sn 1.27 1.26 0.055 W 0.015 0.013 0.016 Mo 0.033 0.034 0.034 Cu 0.32 0.31 0.32 Pb 2.82 2.79 2.85 Zn 0.91 0.93 0.92 GBW 07241
(钨矿石)Sn 0.17 0.17 0.089 W 0.22 0.21 0.21 Mo 0.098 0.095 0.094 Cu 0.096 0.095 0.098 Pb 0.0081 0.0079 0.0085 Zn 0.103 0.10 0.112 表 2 过氧化钠的用量
Table 2. Proportion of Na2O2 flux
样品名称 m熔剂/m样品 w(Sn)/% 测定值 参考值 YSDZ 92-05
(锡矿石)1: 1 1.18 1.76 2:1 1.32 4:1 1.69 6:1 1.78 8:1 1.80 10:1 1.78 表 3 放置时间与加入酒石酸对Sn和W的影响
Table 3. Effect of laying time and adding tartaric acid on Sn and W determination
标准物质
名称放置
时间w(Sn)/% w(W)/% 未加
酒石酸加入
酒石酸标准值 未加
酒石酸加入
酒石酸标准值 GBW 07281
(锡矿石)第1天 4.40 4.46 4.47 0.061 0.067 0.068 第2天 4.38 4.46 4.47 0.059 0.067 0.068 第3天 4.34 4.45 4.47 0.057 0.067 0.068 第4天 4.31 4.44 4.47 0.056 0.065 0.068 第5天 4.28 4.44 4.47 0.057 0.065 0.068 第6天 4.17 4.43 4.47 0.055 0.066 0.068 表 4 酒石酸浓度的影响
Table 4. Effect of tartaric acid concentration
酒石酸浓度
ρ/(g·L-1)ρ(Cu)/(mg·L-1) ρ(Pb)/(mg·L-1) ρ(Zn)/(mg·L-1) ρ(W)/(mg·L-1) ρ(Mo)/(mg·L-1) ρ(Sn)/(mg·L-1) 第1天 第4天 第1天 第4天 第1天 第4天 第1天 第4天 第1天 第4天 第1天 第4天 0 20.25 20.19 20.25 20.00 20.63 20.37 17.38 16.80 20.35 19.18 19.71 18.35 0.25 20.23 20.24 20.29 19.97 20.75 20.24 19.22 17.28 20.74 19.38 20.10 19.20 0.50 20.18 20.20 20.44 20.39 20.58 20.36 19.65 18.07 20.57 19.40 20.42 19.34 0.75 20.16 20.09 20.18 19.95 20.31 20.11 20.19 18.20 20.40 20.04 20.21 20.04 1.00 20.32 20.03 20.02 20.11 20.56 20.16 20.18 20.54 20.68 20.17 20.62 20.36 2.00 19.98 20.25 19.85 20.17 20.32 20.09 20.31 20.44 20.52 20.07 20.47 20.28 3.00 20.03 20.23 19.91 20.18 20.21 20.03 20.21 20.53 20.52 19.93 20.61 20.01 4.00 20.39 20.21 20.19 20.27 20.53 20.11 20.24 19.65 20.68 20.22 20.53 20.49 表 5 方法准确度与精密度
Table 5. Accuracy and precision tests of the method
标准物质
编号元素 w/% 相对误差
RE/%RSD/% 标准值 本法测定值 GBW 07238
(钼矿石)Sn 0.0087 0.0090 3.45 4.5 W 0.36 0.367 1.94 2.9 Mo 1.51 1.59 5.30 1.1 GBW 07239
(钼矿石)Sn 0.0033 0.0035 6.06 4.9 W 0.10 0.105 5.00 2.3 Mo 0.11 0.111 0.91 3.0 GBW 07240
(钨矿石)Sn 0.14 0.146 4.29 3.1 W 0.015 0.012 -20.0 4.4 GBW 07241
(钨矿石)Sn 0.17 0.173 1.76 0.7 W 0.22 0.205 -6.82 2.6 Mo 0.098 0.095 -3.06 2.9 GBW 07281
(锡矿石)Sn 4.47 4.46 -0.22 0.3 W 0.068 0.067 -1.47 1.4 Mo 0.027 0.028 3.70 3.7 Cu 0.26 0.268 3.07 3.6 Pb 2.72 2.75 1.10 0.8 Zn 0.74 0.710 -4.05 3.8 GBW 07282
(锡矿石)Sn 1.27 1.26 -0.79 1.1 W 0.015 0.013 -13.3 4.7 Mo 0.033 0.032 -3.03 3.7 Cu 0.32 0.312 -2.50 3.2 Pb 2.82 2.79 -1.06 0.9 Zn 0.91 0.925 1.65 2.3 GBW(E)070078
(铅锌矿石)Cu 0.10 0.11 10.0 3.2 Pb 2.93 2.87 -2.05 1.5 Zn 0.51 0.53 3.92 1.1 YSDZ 92-04
(锡矿石)Sn 0.63 0.642 1.90 4.9 YSDZ 92-05
(锡矿石)Sn 1.76 1.76 0 2.6 中南79-7A
(钨矿石)Sn 0.0072 0.0070 -2.78 4.9 WO3 0.48 0.468 -2.50 1.0 Mo 0.008 0.0075 -6.25 4.3 表 6 方法比对
Table 6. Comparison of analytical results with this method and traditional method
标准物质
编号元素 w/% 标准值 本法测定值 传统分析方法 GBW 07238
(钼矿石)Sn 0.0087 0.0090 < 0.02 W 0.36 0.367 0.351 Mo 1.51 1.59 1.45 GBW 07241
(钨矿石)Sn 0.17 0.173 0.173 W 0.22 0.205 0.213 Mo 0.098 0.095 0.089 GBW 07281
(锡矿石)Sn 4.47 4.46 4.35 W 0.068 0.067 0.066 Mo 0.027 0.028 0.026 GBW 07282
(锡矿石)Sn 1.27 1.26 1.20 W 0.015 0.013 0.014 Mo 0.033 0.034 0.030 GBW(E) 070078
(铅锌矿石)Cu 0.10 0.11 0.11 Pb 2.93 2.87 2.88 Zn 0.51 0.53 0.52 YSDZ 92-04
(锡矿石)Sn 0.63 0.642 0.646 YSDZ 92-05
(锡矿石)Sn 1.76 1.76 1.42 -
[1] 崔荣国,刘树臣,王淑玲,吴初国.我国重要优势矿产资源国际竞争力研究[J].中国矿业,2009,18(10): 8-11. doi: 10.3969/j.issn.1004-4051.2009.10.003
[2] 黄仲权.云南锡矿业现状及发展对策[J].矿产保护与利用,1992(6): 16-20. http://www.cnki.com.cn/Article/CJFDTOTAL-KCBH199206006.htm
[3] 刘光亮,秦德先,张学书,范柱国.云南省锡矿资源与可持续发展[J].安全与环境工程,2004,11(4): 36-39. http://www.cnki.com.cn/Article/CJFDTOTAL-KTAQ200404009.htm
[4] 邵厥年,陶维屏.矿产资源工业要求手册[M].北京:地质出版社,2010:169-174.
[5] GB/T 1819-2004,锡精矿化学分析方法[S].
[6] GB/T 15924-1995,锡矿石化学分析方法[S].
[7] 岩石矿物分析编委会.岩石矿物分析(第四版第三分册)[M].北京:地质出版社,2011: 185-208.
[8] 岩石矿物分析编委会.岩石矿物分析(第四版第三分册)[M].北京:地质出版社,2011: 321-325.
[9] 岩石矿物分析编委会.岩石矿物分析(第四版第三分册)[M].北京:地质出版社,2011: 338-342.
[10] 赵建为,李树昌.辉钼矿中微量锡的分离与测定[J].岩矿测试,2000,19(3): 173-176. http://www.cnki.com.cn/Article/CJFDTOTAL-YKCS200003002.htm
[11] 盛献臻,张汉萍,李展强,李海萍,何光涛.电感耦合等离子体发射光谱法同时测定地质样品中次量钨锡钼[J].岩矿测试,2010,29(4): 383-386. http://www.cnki.com.cn/Article/CJFDTOTAL-YKCS201004015.htm
[12] 曾慧芳,戢朝玉,陈善科.ICP-AES法分析锡石单矿物的研究[J].岩矿测试,1988,7(3): 175-179. http://www.cnki.com.cn/Article/CJFDTOTAL-YKCS198803003.htm
[13] 岩石矿物分析编委会.岩石矿物分析(第四版第三分册)[M].北京:地质出版社,2011: 297-299.
[14] 张志龙.有色地质分析规程(下册)[M].北京:中国有色金属工业总公司地质局,1992:275-277.
[15] GB/T 14352.1-2010,钨矿石、钼矿石化学分析方法;钨量测定[S].
[16] GB/T 14352.2-2010,钨矿石、钼矿石化学分析方法;钼量测定[S].
-